Professional and fast self-booting hardware diagnostics

  • Complete testing of all major hardware components
  • 3 preset burn-in tests also find sporadic errors
    (quick test, component test and 12-hour test)
  • Meaningful test reports in PDF format
  • Tests regardless of the installed operating system
  • Detailed system information of hardware and software
  • Simultaneous hardware load with burn-in test groups
  • Lots of settings and your own information
  • Extensive hardware monitoring (temperatures, voltages, fan speeds, and much more)
  • SMART values of all connected hard drives via ATA and USB
  • Online license for individual use on different devices

Current version:

6.06

Your benefit

In toolstar®QuickCheckLX you will find 2 system overviews. A one-page system overview with the most important information about the device and the overview for support purposes with all information about all installed hardware components in the system. The two system overviews can be output in the program and saved and archived as a PDF document.

toolstar®QuickCheckLX reliably tests all important components and also looks professional. Hand over the finished device with invoice and PDF protocol. This allows the customer to understand what was tested and which component was defective. This transparency creates trust and satisfied customers! When you ship a new device with a protocol, the burden of proof is immediately reversed. You can prove at any time that the device worked properly when delivered to the customer. This makes warranty discussions with your customers much easier.

When faced with a problem, it is often not 100% clear which part of the system is defective. The hardware or the software? No matter how good and reliable the installed software is, it will not work at all or only function poorly without properly functioning hardware. It can also happen that incorrectly saved data is not caused by the software, but by a defective hard drive or RAM. To solve software problems, you need to make sure the hardware is running properly. With toolstar®QuickCheckLX and the endurance tests, you can handle these quickly and efficiently and also find components that could cause problems in the future.

In order to be able to offer your customers a complete all-round service, you also need a tool that RELIABLY and EFFICIENTLY tests all hardware components in any device type and creates a report for you and the customer. With toolstar®QuickCheckLX you can not only find errors that are occurring or exist now, but also errors that will only occur in the future. A good example is hard drives. It's better to replace your customer's hard drive before they call you with a data recovery request! You set up new systems for your customers every day. So that you can offer a 100% all-round service for them, you need toolstar®QuickCheckWIN! Hand over the finished device with the invoice and protocol. This allows the customer to understand what was tested and which component was defective and had to be replaced. This transparency creates trust and satisfied customers!

All functions of toolstar®QuickCheckLX can also be used via a remote connection with, for example, PCVisit, Teamviewer, Anydesk and other solutions. This means you are always there immediately when your customer makes an inquiry and can offer not only software but also hardware service.

Preconfigured burn-in tests (automation)

In the software, you will find 3 preconfigured burn-in tests for automation next to the component tests (targeted individual tests) directly on the home page.

The quick test tests the most important hardware and software components in one run and at the end gives you a report in which all processes and the system are documented. During the test, the hardware monitoring provided by the system is permanently read and documented. Multiple tests are bundled into groups and run simultaneously. This saves time and puts a strain on the system

The 12 hour test tests the most important hardware and software components with almost all available tests over a defined time of 12 hours and at the end it gives you a log in which all processes and the system are documented. During the test, the hardware monitoring provided by the system is permanently read and documented. Multiple tests are bundled into groups and run simultaneously. With a test lasting over 12 hours, you put extreme strain on the system and find sporadic errors that only appear after a certain runtime or thermal changes.

The component test tests all available hardware and software components in one run and at the end gives you a report in which all processes and the system are documented in detail. During the test, the hardware monitoring provided by the system is permanently read and documented. Multiple tests are bundled into groups and run simultaneously. By simultaneously testing all testable hardware components, you simulate excessive use of the device by an end user.

Areas of application

With the two integrated system overviews “One-page overview” and “Overview for support purposes”, all hardware and certain software information can be accessed and saved centrally.

Running under Windows enables testing of hardware such as CPU, RAM, GPU, disk, motherboard and much more, as well as automated analysis of the Windows event log, drivers and other components. This allows you to carry out a comprehensive hardware and software analysis of a Windows device.

toolstar®QuickCheckLX can also be carried out remotely using any remote maintenance software. Simply transfer it to the customer's computer and start. You then have full access to all functions of toolstar®QuickCheckLX.

Every device that leaves your store should be fully tested and audited and, if possible, completely automated. With toolstar®QuickCheckLX you can fully test a PC after installing the operating system. You receive detailed reports for yourself and attractive test or handover protocols for your customers.

Do you have any questions?

The toolhouse team will be happy to answer any questions you have about our products.
Open contact form

Extract from the available tests

Processor/CPU

CPU core (registers, stack manipulation, addressing modes, flags, integer arithmetic, BCD operations, bit operations, flow control, string operations, processor I/O, exceptions) FPU (load and store, instruction set, rounds and Truncation, Exceptions), MMX Unit, 3DNow! and SSE unit (Data Transfers, Packed Arithmetic, Packed Comparisons, Data Conversion, Logical Operations, Shift Operations), Stress Test, CPU Cache Test

Mainboard

Board and BIOS information (manufacturer, UEFI Windows license key, BIOS date, chipset, socket and much more) PCI device list, details and tests (direct bus scan, BIOS: device search, 16-bit functions, 32 bit functions, 64 bit functions), plug and play, hardware interrupts, DMA and CMOS RAM/real time clock tests (read, write, battery status, checksum, diagnostic status, clock ticking, alarm)

Hardware monitoring / sensors

System temperature, fan speed, voltages, performance indicators
(if supported by the mainboard and the necessary sensors are installed and connected)

Random Access Memory / RAM

Display of possible memory areas, SPD-EEPROM information, memory speed, Windows memory status, tests: addressing, checkerboard pattern, Windows mode, complementary bits, running bits, large complements, distributed accesses

Interfaces/Connections

USB host controller, specifications, manufacturer, name and status. USB device overview and details, controller test. Serial and parallel ports, suitable test plugs are optional. (Internal loop back test, handshake test, send/receive test, controller test, status port test)

GPU / 3D

Test image, video memory test, visible memory test, 3D rendering, OpenCL benchmark test.

Drives (HDD, SSD, NVMe, USB, etc.)

Write test (non-destructive), mechanical test, show sectors, controller test, CD-ROM, DVD, BlueRayZIP, LS120, USB drive

Input devices / HID

Tests for keyboard and mouse
touchscreens, webcam

Comparison of toolstar®testLX and toolstar®QuickCheckLX

The main difference between toolstar®testWIN and toolstar®QuickCheckWIN lies in the automation of all processes in the program. In toolstar®QuickCheckWIN you have the option to choose between 3 prefabricated endurance tests and carry them out. In toolstar®testWIN you can edit the sample tests as you wish or completely Create your own new scripts using the graphical editor.

toolstar®testLX

toolstar®QuickCheckLX

Available system information

Available information & hardware and software tests

toolstar®testLX

toolstar®testLX

toolstar®testLX

toolstar®QuickCheckLX

toolstar®QuickCheckLX

toolstar®QuickCheckLX

Automation (burn-in tests)

Settings and customization options

toolstar®QuickCheckLX

The self-booting hardware and software diagnostic sting software

Order now

Click on the button to go straight to the shopping cart!
list price:
120,00 €
Add to Cart

Are you still unsure?

Within 3 months of purchasing the software you have the option of upgrading to the large toolstar ®testLX version. The purchase price of your toolstar®QuickCheckLX is completely linked to the purchase price of toolstar®testLX is credited.

Just talk to us!

Versionshistory:

Only the last 40 entries in the version history are displayed. A complete list of all changes and improvements can be found in the customer portal.

VersionCategoryChangelog

System requirements

NOTE:

These system requirements provide a rough guideline on which systems the program can run smoothly. toolstar®QuickCheckLX is also capable of operating on small embedded systems or mini PCs.